Codierungen: Diskussionsthread

[AuWeH]

Coding

Byte 00: Rain Sensor Correction (Infrared Transperency at 880nm)
Byte 01: Light Sensor Correction (Transperency)
Byte 02: Options
+1 = Highway Light
+2 = Rain Light
+4 = Rain Closing

Notes
If a coding needs to be altered, it has to be converted from decimal (dec) to hexadecimal (hex).
Bytes are counted from right to left, starting with 0. This is backwards from what you may be used to from editing Long Codings.
Bits are counted from right to left, starting with 0.
Once converted to hex each byte has to be converted to decimal seperately.
Byte 02 coding is the sum of the individual options.
Example
Coding is "00217165" (dec) = "03504D" (hex)
Byte 00 = 4D (hex) = 77 (dec) = Rain Sensor Correction value is 77%
Byte 01 = 50 (hex) = 80 (dec) = Light Sensor Correction value is 80%
Byte 02 = 03 (hex) = 03 (dec) = 01+02 = Options 01 (Highway Light) and 02 (Rain Light) set

hoffe das hilft dir so weiter. also stg9 - dann rls steuer gerät und dort kannst du diese wert verändern. du musst einen dezimalen wert deiner wahl z.b. 50 % in hex umrechnen und dort eintragen (habe ich dick markiert).